带有PFC的开关电源供应器CFMS101S系列

CFM101S

︳CFM101S SERIES
100 WATT OPEN FRAME
AC-DC MODULES WITH PFC
Features
* 100W Single Output
* Universal Input 90-264Vac
* Active PFC Function
* 2”X4” Size
* Efficiency at 89% Typical
* Continuous Short Circuit Protection
* Meets EN55022 Class “B” and
CISPR/FCC Class B

CFMS101S120 12V 8.4A 0 A 1% ±1% ±0.5% 11.4 ~ 12.6V ±1% 87%
CFMS101S150 15V 6.7A 0 A 1% ±1% ±0.5% 14.25 ~ 15.75V ±1% 87%.
CFMS101S200 20V 5.0A 0 A 1% ±1% ±0.5% 19 ~ 21V ±1% 88%
CFMS101S240 24V 4.2A 0 A 1% ±1% ±0.5% 22.8 ~ 25.2V ±1% 88%.
CFMS101S480 48V 2.1A 0 A 1% ±1% ±0.5% 45.6 ~ 50.4V ±1% 89%.
2
Specifications CFM101S Series Derating Curve
INPUT SPECIFICATIONS:
Voltage …....………........…....................................................... 90~264Vac
Frequency ………………………………………….……………..... 47 to 63Hz
Inrush Current………………………………………….… 90A Max. @240Vac
Conducted EMI ……………………………………..…… CISPR/FCC Class B
Leakage Current …………………………………………..…….…… 3.5mA
OUTPUT SPECIFICATIONS:
Holdup Time …………………………………………… 10mS typ. @115Vac
Short Circuit Protection ……………………………….…………… Continuous
Over Voltage Protection ………………………… TVS Component to Clamp
Temperature Coefficient ……………………............................… ±0.05%/℃
GENERAL SPECIFICATIONS: NOTE:
Isolation ………………………………………… Input to output = 4,242VDC 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
Operating Temperature .................... 0 ~ 40℃ (see derating curve) Ripple & Noise measuring @20MHz BW.
Storage Temperature ……………………………...….......……...... -20 ~ 85℃ 2. Line regulation is measured from High Line to Low Line with full load.
Humidity …………………...….......……........ 93% RH max. Non condensing 3. Load regulation is measured from full to 1 load.
Cooling …………………………………………………….. Natural Convection 4. Input connector mates with Molex housing 09-50-3031 and Molex 2878
Switching Frequency ………………………………………… 100KHz Typical series crimp terminal.
MTBF ……… MIL-HDBK-217F, GB, at 25℃/115VAC ………. 200K hrs 5.Output connector mates with Molex housing 09-50-3041 and Molex 2878
Altitude …………………………………………………………………… 2000m series crimp terminal.
Dimensions ……….……………… 101.6x50.8x25.4mm(2.0x4.0x1.0lnches)
Weight ………………………………………………………………………. 150g
SAFETY AND EMC:
Emission and lmmunity ……………………………….….. EN55022 Class B
FCC Part 15 subpart B Class B, EN55024,EN61204-3,EN61000-6-3
EN61000-6-1,EN61000-3-2,EN61000-3-3
Safety …………….….… IEC60950-1 2nd, EN60950-1 2nd, UL60950-1 2nd
Mechanical Specification
Millimeters:x.x = ± 0.5 , x.xx = ± 0.25
Tolerance: Inches:x.xx = ± 0.02 , x.xxx = ± 0.010